Asko R2303 사용 설명서 지침 - 페이지 4
{카테고리_이름} Asko R2303에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Asko R2303 12 페이지. Outdoor refrigeration
페이지 인쇄
Before Putting Into Use
WARNING
Before connecting the appliance to the mains supply,
leave it stand for about 2 hours, which will reduce a
possibility of malfunctions in the refrigeration system due
to transport handling.
•
Clean the appliance, and be thorough, especially in the
interior (See Cleaning and Maintenance).
•
These instructions for use are intended for the user.
They describe the appliance and its correct and safe
use. They were prepared for various types/models of
refrigerators therefore you might find in it description
of some functions and of accesories that your appliance
does not have.
Caring for your stainless steel
Stainless Steel—We strongly advise applying a
commercially available stainless steel cleaner to preserve
and protect the fine finish monthly.
Remove packaging
•
Remove corner blocks and foam drawer stops.
•
Remove all packing material and tape.
Before using, be sure all packing materials and tape
have been removed.
•
If you are discarding an old refrigerating-freezing
appliance, remove the doors to reduce the danger of
children being trapped inside.
We Care for the Environment
•
Our products use environmentally friendly packaging,
which can be either recycled or disposed of in an
environmentally friendly manner. To this end, individual
packaging materials are clearly marked.
•
These instructions are printed either on recycled paper
or chlorine free bleached paper.
•
When your appliance finally wears out, please try not
to burden the environment with it; call your nearest
authorised service agent. (See Disposing of the Worn
Out Appliance).
Disposal of Old Appliances
•
Once your appliance becomes obsolete, dispose of it
immediately.
• If the appliance is equipped with a door lock
mechanism, please make sure the lock is broken and /
or permanently disabled, to prevent suffocation for
children accidentally locked inside during play.
•
The appliance contains refrigerating agent and
insulation materials requiring specific decomposition
procedure. Consult your local organization, authorized
to deal with such materials, or call your dealer. Be
careful not to damage the piping on the rear panel of
the appliance.
Attention
This outdoor/indoor refrigerator must be properly
leveled to ensure correct door alignment and door
closure.
Connect power:
•
Plug the power cord into the correctly earthed wall
outlet which must never be located directly behind the
appliance.
•
Check to make sure power is on by opening the door
to see if interior light turns on.
Slide product into the cutout:
Carefully, slide the appliance into the opening. Be careful
not to entangle power cord. Note: The door should
protrude 2.5 cm beyond the surrounding cabinets.
Set temperature controls:
The temperature controls are preset. Allow 24 hours for
temperature to stabilize.