Asko R2303 사용 설명서 지침 - 페이지 6
{카테고리_이름} Asko R2303에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Asko R2303 12 페이지. Outdoor refrigeration
페이지 인쇄
Placing and Installation
Choosing the Right Place
This appliance is for indoor or outdoor use. Allowed
ambient temperature depends on the model (class) of
the appliance and is indicated on the rating plate of the
appliance.
•
Do not operate the unit where the temperature will
go below 7°C or above 49°C.
•
Exterior surface can be hot in direct sunlight conditions.
Use caution.
Never place the appliance near heat radiating devices. In
case the distance to the heat emitting device is too short,
it may require the installation of an insulation panel.
Placing the Selfstanding Appliance
Place the appliance firmly on a solid base. The appliances
have adjustable legs. Use them to level the appliance.
Level
•
Use a adjustable wrench to turn the leveling legs and
raise or lower the product.
•
Adjust carefully, the outdoor/indoor refrigerator should
be level and plumb with cabinetry, and should align with
adjacent toekick height.
1. Turn Right to lower
2. Turn Left to raise
Placing the Built-in
Cut-out dimensions:
Height: 877 mm minimum
Width: 603 mm minimum
Depth: 610 mm
•
Do not operate the unit where the temperature will
go below 7°C or above 49°C.
•
Surface can be hot in direct sunlight conditions. Use
caution.
Never place the appliance near heat radiating devices. In
case the distance to the heat emitting device is too short,
it may require the installation of an insulation panel.
Connection to Power Supply
The refrigerator should be connected to a properly
earthed power supply socket that is accessible when the
refrigerator is installed.
Do not use extension cords or power supply boards.
The power supply is to be 240V, 50 Hz.
The connection to the mains supply and earthing have to
be made according to current standards and regulations.
The appliance resists temporary voltage tolerance up to
-6 to +6 %.