Ambirad Tornado 600 운영, 유지보수 및 서비스 매뉴얼 - 페이지 7

{카테고리_이름} Ambirad Tornado 600에 대한 운영, 유지보수 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ambirad Tornado 600 15 페이지. Mobile radiant heater

Axial fan & heat exchanger

Step 1 Axial fan

Remove the 4 nuts securing the axial fan to the rear spinning

assembly.

Check that the fan spins freely without any sign of being out of

balance or bearing noise. If so replace the fan.

If fan operation appears fine, then with a soft brush remove dust

from the impellars and motor.

Replace the fan after checking the heat exchanger assembly.

Step 2 Heat exchanger assembly maintenance

Remove the screws fastening the front spinning to case assembly.

Using a soft brush remove any dust and dirt from the rigid tubes,

flexible coil and reflector gaining access front and rear of the

product. Inspect the tube assembly and if holes or internal

blockages are suspected either replace the at risk component by

removal of the heat exchanger assembly through the front of the

product or clear any blockage.

Refit the front spinning assembly.

Burner maintenance

Step 1

Remove the screws fixing the rear spinning to the case assembly

and the gas hose.

Step 2

Remove the bolts securing the rear support to the case assembly.