Ambirad Tornado 600 운영, 유지보수 및 서비스 매뉴얼 - 페이지 8

{카테고리_이름} Ambirad Tornado 600에 대한 운영, 유지보수 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ambirad Tornado 600 15 페이지. Mobile radiant heater

Step 3

Slacken the grub screw securing the burner to the firing tube.

Step 4

Remove the screws fixing the burner assembly to the case.

Step 5

MOBILE RADIANT HEATER

Slide the burner assembly away from the firing tube to reveal the

burner assembly.

Inspect the burner electrode assembly condition taking care when

reassembling to ensure that the leads to the assembly are fitted

the same way as on removal. If the electrode assembly is in good

order check the spark electrode gap. This should be

3.5mm + 0.5mm. Adjust the gap if necessary by bending the

earth rod.

Step 6

With a soft brush remove dust from the burner head filter.

If a blockage is suspected replace the filter by removing the ignitor

assembly and with a small screwdriver prise the filter from its

location.

Re-fit.

Step 7

Access to the injector is by removal of the screws that attach the

gas valve fixing plate to the burner assembly.

On removal of the screws and plate inspect the injector and clean

as necessary. Do not broach out.