ACR STOVES E600 Quick Start Manual - Page 4

Browse online or download pdf Quick Start Manual for Ranges ACR STOVES E600. ACR STOVES E600 9 pages. Electric fireplace insert range

Print Page

This product has been designed to be installed as either a wall

mounted insert and /or installed secured inside a frame.

The insert should be fitted to one of the following options:

• Wall mounted - using the H bracket which is

located on the rear of the appliance. Fixings

are not supplied as these will depend of the

wall type - please ensure that you choose the

correct fixings for the wall type. The wall must

be of sound construction and be able to hold

the weight of the appliance.

• Mounted on a solid base ensuring that

combustible material is kept away from the

heater outlet.

• Fitted into a studded wall - this will need to

be finished with either plaster board or have a

plastered finish. The insert can be installed

with the facing trim flush up to the plastered

finish - see drawings below.

Installation

• Ensure that the cable is not run across the

heater and can be plugged into a mains

socket without the use of an extension cable.

A qualified electrician can extend the cable if

required.

• Ensure that the plug socket or fused spur is

easily accessible to allow the appliance to be

switched off when not in use or for

maintenance purposes.

• When building the appliance in, ensure that

the mains supply switch can be easily

isolated if required.

Placing the Logs and Embers

• The accessory box which is packed inside

the fire. This contains the crystals to create

the fire bed. Place the crystals evenly on the

base of the fire. The logs can then be placed

in a position of your choice over the crystals.

Please handle the logs with care as these are

delicate.

• We suggest the following log layouts to give

the best effect: