ACR STOVES E600 Краткое руководство по эксплуатации - Страница 4
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Диапазоны ACR STOVES E600. ACR STOVES E600 9 страниц. Electric fireplace insert range
This product has been designed to be installed as either a wall
mounted insert and /or installed secured inside a frame.
The insert should be fitted to one of the following options:
• Wall mounted - using the H bracket which is
located on the rear of the appliance. Fixings
are not supplied as these will depend of the
wall type - please ensure that you choose the
correct fixings for the wall type. The wall must
be of sound construction and be able to hold
the weight of the appliance.
• Mounted on a solid base ensuring that
combustible material is kept away from the
heater outlet.
• Fitted into a studded wall - this will need to
be finished with either plaster board or have a
plastered finish. The insert can be installed
with the facing trim flush up to the plastered
finish - see drawings below.
Installation
• Ensure that the cable is not run across the
heater and can be plugged into a mains
socket without the use of an extension cable.
A qualified electrician can extend the cable if
required.
• Ensure that the plug socket or fused spur is
easily accessible to allow the appliance to be
switched off when not in use or for
maintenance purposes.
• When building the appliance in, ensure that
the mains supply switch can be easily
isolated if required.
6
Placing the Logs and Embers
• The accessory box which is packed inside
the fire. This contains the crystals to create
the fire bed. Place the crystals evenly on the
base of the fire. The logs can then be placed
in a position of your choice over the crystals.
Please handle the logs with care as these are
delicate.
• We suggest the following log layouts to give
the best effect:
7