Aktakom APS-7306 User Manual - Page 7

Browse online or download pdf User Manual for Power Supply Aktakom APS-7306. Aktakom APS-7306 12 pages. Programmable dc power supply

Print Page

Applying Voltage to the Load

1. Press the Off/On key [1] to apply the voltage to the load.

The OUT [2] and C.V. indicators [8] light. The power supply

works in constant voltage (CV) mode; the display now shows the

actual output voltage and current.

If the current exceeds the set current limit, the power supply

automatically goes into constant current (CC) mode. The C.V.

indicator goes out and the C.C. indicator [7] lights.

2. Press the Off/On key [1] to switch the output off.

PROTECTION

Using Overcurrent Protection

1. To protect against overcurrent, set up the maximum current and

then press the OCP button.

2. Press Off/On to apply the output to the load.

If the output current becomes higher than the set value, the

power supply cuts off the output and the OCP indicator flashes.

3. Disconnect the load. To recover, press the OCP key.