Canon AE-1 Installation Procedures Manual - Page 8
Browse online or download pdf Installation Procedures Manual for Digital Camera Canon AE-1. Canon AE-1 48 pages.
Also for Canon AE-1: Getting Started (2 pages), Instructions Manual (22 pages), Manual (42 pages), Manual (12 pages), Instructions Manual (22 pages)
1.3
Installing the Buffer
5) Remove all packing tape from the buffer pass unit.
6 ) Place the buffer pass unit on the delivery tray, and
Pass Unit
connect the connector [l] to the host machine.
7) Match the claw of the buffer pass unit against the
1) Detach the blanking part [I] from the rear internal
connecting assembly [2], and secure the buffer pass
cover and the blanking part [2] of the delivery tray,
unit in place using two screws [3] (tapping; M4 x
by disengaging the claw using a flat-blade screw-
12).
driver.
2) Detach the blanking part [3] using a flat-blade
screwdriver or the like.
3) Remove the paper full sensor flag [4] for delivery
tray 1.
Do not remove the paper full sensor flag [5] for de-
livery tray 2.
4) Remove the paper full sensor flag for delivery tray
1, and then attach the cover [3].
A
When the cover [3] is not attached, remove the fol-
lowing parts:
Host machine's front cover (one blanking rubber
and two screws)
Host machine's delivery tray (two screws)
Host machine's rear cover (four screws)
Next, remove the paper full sensor flag [4] for de-
livery tray 1 and then attach the cover in place.
When installing the buffer pass unit, take care not
to break [4] of the sensor flag for delivery tray 2.