DOMPEL JUNIOR Instruction Manual - Page 4

Browse online or download pdf Instruction Manual for Indoor Furnishing DOMPEL JUNIOR. DOMPEL JUNIOR 6 pages. Trolley

Print Page
ENGLISH
LOCATION OF INSTALLATION
Install your Dompel product in a level place with no grooves
or splices, preventing rocking and vibration. The location must
be airy and it must not allow straight sunlight and it must be
away from sources of heat (stoves, ovens,etc.) and flammable
products. Do not install your product outdoors.

CLEANING AND MAINTENANCE

Do not use metal spatulas, brushes and cleaning agents such as alcohol, acetone,
kerosene, gasoline, bleach, thinner, solvents, varsol, vinegar or other chemicals or
abrasives not recommended in this manual.
To easily clean it, use a solution of warm water with a neutral soap and then wipe dry
carefully. The plastic parts can not be washed with boiling water. Perform periodic cleaning,
accumulated dust affects the beauty of the product making it difficult to clean the product.
INSTALLATION AND ASSEMBLY
Remove all components from the package. The 4 casters are in a plastic bag inside the
carton.The assembly of this product is totally manual and requires no tools.
IMPORTANT
This trolley allows 03 different ways of disposition of the shelves. Choose your favorite
observing the assembly position of the long extension (F) in the configurations: (X) long
extension assembled over the bottom shelf; (Y) long extension assembled over the
intermediate shelf; (Z) long extension assembled under the top.
X
1
1 - Support the shelves (A)
on a flat base, manually
attaching the 04 casters
supports (D) to the bottom of
the shelf.
4
4 - Attach the shelf (A) to the
extensions (E or F). Repeat
this process in the next
module.
MERELY ILLUSTRATIVE IMAGES.
Products may suffer changes in its components without prior warning. If any questions,
contact Dompel.
Y
2
2 - Manually fit the 04
casters (C) to the caster
supports (D). Make sure
they are snug and aligned
when supported on the
floor.
5
SECURITY
Avoid
After unpacking the
product, keep all the
pack material out of
children's reach.
Z
3
3 - Assembly the first 04
extensions (short or long)
(E or F) in the top of the
shelf (A). Repeat this
process in the 04 next
modules.
5 - Finish the assembly by fitting
the last 4 extensions (E or F) and
the top (B).
accidents.