DOMPEL JUNIOR Kullanım Kılavuzu - Sayfa 4

İç Mekan Mobilyaları DOMPEL JUNIOR için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. DOMPEL JUNIOR 6 sayfaları. Trolley

Sayfayı Yazdır

ENGLISH

LOCATION OF INSTALLATION

Install your Dompel product in a level place with no grooves

or splices, preventing rocking and vibration. The location must

be airy and it must not allow straight sunlight and it must be

away from sources of heat (stoves, ovens,etc.) and flammable

products. Do not install your product outdoors.

CLEANING AND MAINTENANCE

Do not use metal spatulas, brushes and cleaning agents such as alcohol, acetone,

kerosene, gasoline, bleach, thinner, solvents, varsol, vinegar or other chemicals or

abrasives not recommended in this manual.

To easily clean it, use a solution of warm water with a neutral soap and then wipe dry

carefully. The plastic parts can not be washed with boiling water. Perform periodic cleaning,

accumulated dust affects the beauty of the product making it difficult to clean the product.

INSTALLATION AND ASSEMBLY

Remove all components from the package. The 4 casters are in a plastic bag inside the

carton.The assembly of this product is totally manual and requires no tools.

IMPORTANT

This trolley allows 03 different ways of disposition of the shelves. Choose your favorite

observing the assembly position of the long extension (F) in the configurations: (X) long

extension assembled over the bottom shelf; (Y) long extension assembled over the

intermediate shelf; (Z) long extension assembled under the top.

1 - Support the shelves (A)

on a flat base, manually

attaching the 04 casters

supports (D) to the bottom of

the shelf.

4 - Attach the shelf (A) to the

extensions (E or F). Repeat

this process in the next

module.

MERELY ILLUSTRATIVE IMAGES.

Products may suffer changes in its components without prior warning. If any questions,

contact Dompel.

2 - Manually fit the 04

casters (C) to the caster

supports (D). Make sure

they are snug and aligned

when supported on the

floor.

SECURITY

Avoid

After unpacking the

product, keep all the

pack material out of

children's reach.

3 - Assembly the first 04

extensions (short or long)

(E or F) in the top of the

shelf (A). Repeat this

process in the 04 next

modules.

5 - Finish the assembly by fitting

the last 4 extensions (E or F) and

the top (B).

accidents.