Da-Lite Advance MPS-ACM Instructions - Page 3

Browse online or download pdf Instructions for Racks & Stands Da-Lite Advance MPS-ACM. Da-Lite Advance MPS-ACM 4 pages. Mobile plasma stand automated confidence monitor

Print Page

2. Insert the Caster stems or Glide stems into the Base. See

Figure 1. Must go in straight.

3. Insert tube enclosures shown.

4. Insert two Columns into the Base and install the fasteners

shown. Leave loose at this time.

5. Slide the Top Assembly down the Columns. See Figure

2. Position the Top by tightening both Knobs. Make sure

unit is level.

6. Tighten the fasteners at the bottom of the Columns.

7. Attach Zee-Bar Plate to Hinge. See Figure 3.

8. Attach the Links to the outside of the Zee Bar

Assembly.

9. Mount the Hanging Brackets to the back of the Plasma

Unit utilizing all the fastener points recommended by the

plasma manufacturer. See Figure 4.

Figure 1

KNOBS TO

HOLD POSITION

Figure 2

LINK

Figure 3

Figure 4

HINGE