Dongcheng DSB02-185 Operation Instructions Manual - Page 3

Browse online or download pdf Operation Instructions Manual for Sander Dongcheng DSB02-185. Dongcheng DSB02-185 6 pages. Orbital sander

Print Page

application. The correct power tool will do the job better and safer at the rate

for which it was designed.

18. Do not use tool if switch does not turn it on or off. Any power tool that

cannot be controlled with the switch is dangerous and must be repaired.

19. Disconnect the plug from the power source and/or the battery pack

from the power tool before making any adjustments, changing

accessories, or storing power tools. Such preventive safety measures

reduce the risk of starting the power tool accidentally.

20. Store idle power tools out of the reach of children and do not allow

persons unfamiliar with the power tool or these instructions to operate

the power tool. Power tools are dangerous in the hands of untrained users.

21. Maintain power tools. Check for misalignment or binding of moving

parts, breakage of parts and any other condition that may affect the

power tool's operation. If damaged, have the power tool repaired before

use. Many accidents are caused by poorly maintained power tools.

22. Keep cutting tools sharp and clean. Properly maintained cutting tools with

sharp cutting edges are less likely to bind and are easier to control.

23. Use the power tool, accessories and tool bits etc. in accordance with

these instructions, taking into account the working conditions and the

work to be performed. Use of the power tool for operations different from

those intended could result in a hazardous situation.

Service

24. Have your power tool serviced by a qualified repair person using only

identical replacement parts. This will ensure that the safety of the power

tool is maintained.

VOLTAGE WARNING:

Before connecting the machine to a power source (receptacle, outlet, etc.), be

sure the voltage supplied is the same as that specified on the nameplate of the

machine. A power source with voltage greater than that specified for the machine

can result in SERIOUS INJURY to the user, as well as damage to the machine. If

in doubt, DO NOT PLUG IN THE MACHINE. Using a power source with voltage

less than nameplate rating is harmful to the motor.

-3-

SPECIFICATIONS

Rated Power Input

Orbits Frequency

Pad Size

Net Weight

※Due to the continuing program of research and development, the specifications

herein are subject to change without prior notice.

ADDITIONAL SAFETY RULES

Hold the tool firmly.

Do not leave the tool running. Operate the tool only when hand-held.

This tool has not been waterproofed, so do not use water on the workpiece

surface.

Do not use the tool with damaged cord. If the cord is damaged, do not touch it and

unplug it immediately, or there will be the danger of electric shock.

SAVE THESE INSTRUCTIONS.

WARNING! MISUSE or failure to follow the safety rules stated in this instruction

manual may cause serious personal injury.

INSTRUCTIONS FOR OPERATION

Checking Voltage

Warning: Always make sure the local voltage is the same with the rated

voltage showed on the nameplate. If exceeds, it may cause damages to the tool

and personal injuries; if lower, it may cause damage to the motor; if uncertain, do

not connect to the power source .

220 W

12000 .../min

93x185

1.6 kg

-4-