DoorHan DCUH-3 Owner's Manual - Page 8
Browse online or download pdf Owner's Manual for Control Unit DoorHan DCUH-3. DoorHan DCUH-3 16 pages. Control unit for electrohydraulic dock leveler with hinged lip
Also for DoorHan DCUH-3: Manual (12 pages)
Print Page
Fig. 5.5. Connection scheme of lip inductive position sensor for DCUH-2 control unit*
COM
* Connection scheme refers to DoorHan operators of Shaft series only.
6. PROGRAMMING
6.1. DIP SWITCHES
DIP switches are used to switch between the operating modes of the control unit board.
WARNING!
Prior to switching between the operating modes turn the power supply OFF.
When using the device for the first time make sure the DIP switches 1 and 2 are in correct position.
Table 6.1.1. DIP switches operation
DCUН-2 operating mode
DIP 1 = Off
DIP 2 = Off
DIP 3 is used to enter the advanced menu.
DIP 3 = Off (main menu)
DIP 3 = On (advanced menu)
DIP 4 is not used
Menu screen shows dH2
In DCUH-2 mode each operation of the door and dock leveler is displayed on the menu screen accordingly (see Ta-
ble 6.1.2).
8
Shaft operator control board terminals
OPEN
STOP
red
Lip inductive
Shaft operator
position sensor
control post
DCUН-3 operating mode
DIP 1 = Off
DIP 2 = On
DIP 3 is used to enter the advanced menu.
DIP 3 = Off (main menu)
DIP 3 = On (advanced menu)
DIP 4 is not used
Menu screen shows dH3
CLOSE
black
blue
+24V