Canon PIXMA MP620 series Connection Manual - Page 3

Browse online or download pdf Connection Manual for All in One Printer Canon PIXMA MP620 series. Canon PIXMA MP620 series 19 pages. Installing your multifunction on additional computers windows os
Also for Canon PIXMA MP620 series: Setup (4 pages), Supplementary Manual (6 pages), Setup Instructions (4 pages), Manual (20 pages), Specification (2 pages), Manual (10 pages), Manual (8 pages), Network Setup Manual (22 pages), Installation Manual (11 pages), Installation Manual (7 pages), Service Manual (46 pages), Installing (21 pages)

Print Page
Canon PIXMA MP620 series Connection Manual
An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless
connection without using an access point, is not supported.
Be sure to prepare an access point

Important Information You Need Before Adding Your Multifunction

The following information is required to connect to your access point or router.
•
Access Point Name/Network Name:
Also referred to as SSID. A name to identify the specific access point.
•
Network Key:
Also referred to as encryption key, WEP key or VVPA/WPA2 passphrase, Pre-Shared
key.
A password required to set to prevent unauthorized access to communication.
Check your access point or route for the following information, and then write it down.
NOTE: For details on how to check the following information, refer to the manual of your access
point or router, or contact its manufacturer.
Page 3