Canon PIXMA MP620 series Aansluithandleiding - Pagina 3

Blader online of download pdf Aansluithandleiding voor {categorie_naam} Canon PIXMA MP620 series. Canon PIXMA MP620 series 19 pagina's. Installing your multifunction on additional computers windows os
Ook voor Canon PIXMA MP620 series: Setup (4 pagina's), Aanvullende handleiding (6 pagina's), Installatie-instructies (4 pagina's), Handmatig (20 pagina's), Specificatie (2 pagina's), Handmatig (10 pagina's), Handmatig (8 pagina's), Handleiding voor netwerkinstellingen (22 pagina's), Installatiehandleiding (11 pagina's), Installatiehandleiding (7 pagina's), Servicehandleiding (46 pagina's), Installing (21 pagina's)

Canon PIXMA MP620 series Aansluithandleiding
An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless
connection without using an access point, is not supported.
Be sure to prepare an access point

Important Information You Need Before Adding Your Multifunction

The following information is required to connect to your access point or router.
Access Point Name/Network Name:
Also referred to as SSID. A name to identify the specific access point.
Network Key:
Also referred to as encryption key, WEP key or VVPA/WPA2 passphrase, Pre-Shared
key.
A password required to set to prevent unauthorized access to communication.
Check your access point or route for the following information, and then write it down.
NOTE: For details on how to check the following information, refer to the manual of your access
point or router, or contact its manufacturer.
Page 3