Canon PIXMA MP620 series Service Manual - Page 42

Browse online or download pdf Service Manual for All in One Printer Canon PIXMA MP620 series. Canon PIXMA MP620 series 46 pages. Installing your multifunction on additional computers windows os
Also for Canon PIXMA MP620 series: Setup (4 pages), Supplementary Manual (6 pages), Setup Instructions (4 pages), Manual (20 pages), Specification (2 pages), Manual (10 pages), Manual (8 pages), Network Setup Manual (22 pages), Installation Manual (11 pages), Connection Manual (19 pages), Installation Manual (7 pages), Installing (21 pages)

Print Page

Set the ink absorber counter value to a new EEPROM after the logic board is replaced in servicing.

1) Before replacement of the logic board, check the ink absorber counter value in EEPROM information print.

2) After replacement of the logic board, the ink absorber counter value should be set in the service mode using the Service Tool.

In the Ink Absorber Counter section of the Service Tool, select Main from the Absorber pull-down menu.

From the Counter Value(%) pull-down menu, select the value (in 10% increments) which is the closest to the actual counter value

confirmed before replacement of the logic board, and click Set.

3) Print EEPROM information to confirm that the value is properly set to the EEPROM.

<3-3. Adjustment / Settings, (5) and (6)>

40 / 44