Astralpool RF Robotic Installation And Operating Instructions Manual - Page 3
Browse online or download pdf Installation And Operating Instructions Manual for Swimming Pool Vacuum Astralpool RF Robotic. Astralpool RF Robotic 17 pages.
Print Page
Operating the pool cleaner
1. Place the power supply (transformer) at least 3.6 meters / 11.8 feet from the pool and at
least 12 cm / 4 Inch above the surface (fig.1). The transformer will supply low voltage to
the cleaner.
2. Uncoil the cable.(fig.1a)
3. Place the unit in the water. Turn the unit
side to side in the water to allow air to
escape from the body and then let the
cleaner sink to the bottom of the pool
(fig.3). Then, spread the cable over the
surface of the pool as evenly as possible
(fig.1).
unit
3. 6m /11 .8 ft
12 cm
(4 inch)
4. Plug the cable into the power supply. Make sure the key on the plug corresponds
exactly with the key slot on the socket of the power supply (fig. 3a).
Plug the power supply into a grounded outlet. Ensure that the electric outlet has been
properly grounded (fig.3b). Press the "ON" button on the power supply. The light will
glow indicating that the system is " ON " and the pool cleaner will start the cleaning
cycle. The unit keeps record of the number of cleaning cycles. Only an authorized
service center can display the accumulated cleaning cycles. (See details on the next
page)
1
1a
3
3
3a
3b