Astralpool RF Robotic Handleiding voor installatie en gebruik - Pagina 3

Blader online of download pdf Handleiding voor installatie en gebruik voor {categorie_naam} Astralpool RF Robotic. Astralpool RF Robotic 17 pagina's.

Operating the pool cleaner

1. Place the power supply (transformer) at least 3.6 meters / 11.8 feet from the pool and at

least 12 cm / 4 Inch above the surface (fig.1). The transformer will supply low voltage to

the cleaner.

2. Uncoil the cable.(fig.1a)

3. Place the unit in the water. Turn the unit

side to side in the water to allow air to

escape from the body and then let the

cleaner sink to the bottom of the pool

(fig.3). Then, spread the cable over the

surface of the pool as evenly as possible

(fig.1).

unit

3. 6m /11 .8 ft

12 cm

(4 inch)

4. Plug the cable into the power supply. Make sure the key on the plug corresponds

exactly with the key slot on the socket of the power supply (fig. 3a).

Plug the power supply into a grounded outlet. Ensure that the electric outlet has been

properly grounded (fig.3b). Press the "ON" button on the power supply. The light will

glow indicating that the system is " ON " and the pool cleaner will start the cleaning

cycle. The unit keeps record of the number of cleaning cycles. Only an authorized

service center can display the accumulated cleaning cycles. (See details on the next

page)