Canon CanoScan 9000F Quick Start Manual - Page 15

Browse online or download pdf Quick Start Manual for Scanner Canon CanoScan 9000F. Canon CanoScan 9000F 19 pages. Brochure
Also for Canon CanoScan 9000F: Brochure (8 pages), Quick Start Manual (39 pages)

Print Page

1. Table of Contents
2. Safety Precautions
2. General Handling Precautions
2. Setup and Operating Conditions
3. Package Contents
4. Installing the Software
5. Preparing the Scanner
6. Connecting the Scanner
7. Try Scanning
8. Using the Scanner Buttons
9. Scanning with MP Navigator EX
10. Scanning Film
11. Specifications

35 mm Slides

Align the Film Guide's tab with the FILM

symbol on the platen glass of the scanner.

Place a slide or slides face down (correctly

viewed from below) in the Film Guide as

shown in the figure on the right.

120 Format Films

Align the Film Guide's tab with the FILM

symbol on the platen glass of the scanner,

then open the Film Holder and remove the

Film Retainer Sheet.

Place the film face down.

Close the Film Holder.

• Leave a gap of 5 mm

between films when placing two or more

120 format films on the platen glass.

• Ensure that there is no gap between the

edge of the film and the Film Guide on the

side near the Calibration Slot.

(0.2 in.)

or greater

Scanning Film

Calibration Slot