Canon L1 Installation Procedures Manual - Page 27

Browse online or download pdf Installation Procedures Manual for Scanner Canon L1. Canon L1 48 pages.
Also for Canon L1: Instructions Manual (37 pages)

Print Page

1. Installation Procedure

12) In the case of a Finisher-AEl, mount the punch

Connect it to the connectors 5804 [I] and 5805 [2] of

lower front fixing plate 2 [I] to the foot at the front

the saddle drive PCB; then, route the connector cable

through the two cable clamps [3], and fix it in place.

9) Align the rubber sheet [I] that comes with the buff-

er pass unit with the rib [2] on the right side of the

puncher unit and paste it on.

10) Mount the finisher's rear cover and the cable cov-

er.

11) Mount the rear small cover of the finisher using a

screw.

of the finisher using a screw [2] (binding; M4 x 6).

MEMO:

In the case of a Saddle Finisher-AE2, the punch

lower front cover fixing plate 2 comes mounted.

(Its shape is different from the punch lower front

cover fixing plate 2 of the Finisher-AE1.)

13) In the case of a Saddle Finisher-AE2, mount the

lower front extension stay [I] using two screws [2]

(binding; M3 x 8).