Canon L1 Installation Procedures Manual - Page 26

Browse online or download pdf Installation Procedures Manual for Scanner Canon L1. Canon L1 48 pages.
Also for Canon L1: Instructions Manual (37 pages)

Print Page

1. Installation Procedure

Detach the cable cover [I], and remove the six screws

[2]; then, detach the rear cover [3].

6) Remove the screw [I], and detach the upper rear

(small) cover [2] of the finisher.

7) Cut off the face cover [3] using nippers.

8) Securely fit the connector cable of the puncher unit

to the two connectors on the PCB of the finisher.

Check to be sure that the connector is in firm con-

tact. If the puncher unit malfunctions after installa-

tion, disconnect and then connect the connector and

run a check.

<Finisher-AE 1 >

Connect it to the connectors 5705 [I] and J706 [2] of

the finisher controller PCB.