Astro Tool EUSP175 Operation Instructions - Page 3

Browse online or download pdf Operation Instructions for Power Tool Astro Tool EUSP175. Astro Tool EUSP175 4 pages. Portable hex die crimp

Print Page

The Astro Tool Corp. EUSP175 portable pneumatic C-Frame crimping tool can be bench mounted for

improved operating efficiency. The bench mount can be positioned at any angle to suit the operator. A foot

pedal may be added to increase the versatility of the tool.

There are two versions of the bench mount assembly:

Part number 621201; A 360 degree swivel bench mount assembly.

Part number 621202; A 360 degree swivel bench mount assembly with a foot pedal

actuator.

ASSEMBLY INSTRUCTIONS FOR 621201 BENCH MOUNT:

1. Firmly attach the base plate to the bench before attaching the tool; to prevent tipping.

2. Remove the stem from the base by loosening the hand screw.

3. Assemble the tool to the stem with the two screws and washers supplied. Before tightening the

screws, center the tool on the stem plate.

4. Insert the steam into the base, select a desired angle and tighten the hand screw firmly.

See figure # 3

5. The tool is now ready for hand actuated operation as described in the BASIC OPERATION section

of this manual.

Figure # 3

5-22-15 TIUS75-99-1