Astro Tool EUSP175 Operation Instructions - Page 4

Browse online or download pdf Operation Instructions for Power Tool Astro Tool EUSP175. Astro Tool EUSP175 4 pages. Portable hex die crimp

Print Page

621202 BENCH MOUNT AND FOOT SWITCH INSTALLATION:

1. Mount tool as described in instructions for 621201 Bench Mount Assembly Instructions section of

this manual.

Connector

To Foot Pedal

2. Connect Foot Switch and Actuator Assembly to tool using supplied connectors. See Figure # 4.

3. Install the appropriate die set for the connector or contact to be crimped. Refer to DIE

INSTALLATION section of this manual.

4. Connect filtered and lubricated air supply to the foot pedal assembly.

5. The tool is now ready for use. Follow the crimping instructions as described in the CRIMPING

OPERATION section of this manual.

ASTRO TOOL CORP. MANUFACTURERS OF INSERTION, REMOVAL,

CRIMP TOOLS AND CONNECTOR SERVICE KITS

ASTRO TOOL CORPORATION • 21615 S.W. T-V HWY. • BEAVERTON OREGON 97003

Actuator Assembly

Figure # 4

503-642-9853 • FAX 503-591-7766

Set Screw

5-22-15 TIUS75-99-1