ASTRO-PHYSICS 1568GTO Maintenance Instructions Manual - Page 3

Browse online or download pdf Maintenance Instructions Manual for Keypad ASTRO-PHYSICS 1568GTO. ASTRO-PHYSICS 1568GTO 17 pages.

Print Page

Removing and installing the KeYPRo

the KeYPRo keypad protector is a heavy-duty molded silicone-rubber casing with a full 1/4" thickness on all impact

surfaces. if you accidentally drop your keypad, the rubber casing will absorb much of the blow. Your display, keypad,

electronics and the hard-plastic keypad case itself will be protected from damage. in addition, the rubber prevents the

keypad from sliding when placed on a table or other flat surface and the keypad will feel secure in your hands as you

observe. the KeYPRo also offers protection during transport and storage

the black protective casing is designed with cutouts for the cable and retractable hanger.

Caution: the KeYPRo fits closely around the keypad controller. You must work it gently into place. if you force the

rubber casing while it is being installed on your keypad, you may tear the rubber.

1. Remove the silicone-rubber keypad protector (KeYPRo) starting at the

bottom of the keypad. carefully work the protector's thin end over the cable

strain relief and pull enough cable through to relieve any stress on either the

keypad protector or the cable.

two objectives:

a) don't tear the keypad protector!

b) don't damage the cable strain relief!

2. slide the thick end of the keypad protector up and away

from the display end of the keypad.

for battery replacement or internal contact cleaning, you do

not need to completely remove the keypad protector. simply

pull enough cable through to get it out of your way. for keypad

cable replacement, remove the KeYPRo completely by pulling

the cable and locking plug out through the bottom opening.