Astrohog IP0032 Manual - Page 4

Browse online or download pdf Manual for IP Phone Astrohog IP0032. Astrohog IP0032 18 pages.

Print Page
IP Phone Manual
PPPoE setting
User name: PPPoE user name setting
Password: PPPoE Password setting
2
LAN Setup
Bridge: set Ethernet interface into bridge mode
NAT: set Ethernet interface into NAT mode
3
DNS
Primary DNS: First DNS address setting
Secondary DNS: second DNS address setting
4
VLAN
Activation: enabled/disabled ULAN setting
VID: setting VID 2~4094
Priority: setting preferred 0~7
CFI: 0~1
5
Status: Show WAN, LAN IP address and MAC address.
SIP Settings
If you want to use Keypad to set the SIP setting, you have to go to
item 7 (Administrator) System
Authentication
you can not change the SIP setting.
1
Service domain
First realm
Activation: first sip server enabled/disabled
User name: SIP user name setting
Display name: SIP display name setting
Register name: SIP register name setting
Register password: SIP ergister password setting
Proxy server: SIP Proxy server address setting
Domain server: Domain server address setting
Outbound proxy: Outbound Proxy address setting
Second realm
Activation: second SIP sip server enabled/disabled
User name: SIP user name setting
Display name: SIP display name setting
Register name: SIP register name setting
Register password: SIP ergister password setting
6
to input the password, or
IP Phone Manual
Proxy server Proxy: SIP Proxy server address setting
Domain server: Domain server address setting
Outbound proxy: Outbound Proxy address setting
Third realm
Activation: Third SIP sip server enabled/disabled
User name: SIP user name setting
Display name SIP: SIP display name setting
Register name: SIP register name setting
Register password: SIP ergister password setting
Proxy server Proxy: SIP Proxy server address setting
Domain server: Domain server address setting
Outbound proxy: Outbound Proxy address setting
2
Codec
Codec type
G.711 uLaw:
G.711 aLaw:
G.723:
G.729:
G.726-16:
G.726-24:
G.726-32:
G.726-40:
VAD: Voice Active Detection Enable/Disable.
3
RTP setting
Outband DTMF: Outband DTMF Enable/Disable
Duplicate RTP
No duplicate:
One duplicate:
Two duplicate:
4
RPort Setting: RPort Enabled/Disabled RPORT setting
5
Hold by RFC: disabled/enabled setting
6
Status: Show the SIP Proxy register status. You can use UP/Down
key to check each Realm's status.
First Realm:
Second Realm:
Third Realm:
7