Astrohog IP0032 Manual - Page 5

Browse online or download pdf Manual for IP Phone Astrohog IP0032. Astrohog IP0032 18 pages.

Print Page
IP Phone Manual
NAT Transversal
STUN setting
STUN: STUN disabled/enabled
STUN server setting
Administrator
1
Auto Config
Config Mode: You can select Disable/TFTP/FTP to do the auto
config function. This function must work with the Auto Config
Server.
TFTP server: Setting the TFTP server IP address.
FTP server: Setting the FTP server IP address.
FTP Login Name: Setting the login name to the FTP server.
FTP Password: Setting the Password to the FTP server.
2
Default setting: You can restore to the default setting.
3
System Authentication: To do the SIP setting from Keypad, need
to input the password first. Default is test.
4
Version: This will show the system's firmware version.
5
Watch Dog: You can use this to enable Watch Dog function to do
the debugging.
6
Restart: You can use this function to restart your IP Phone.

3. Setup the VoIP Phone by Web Browser

Default the IP Phone's NAT is enabled, WAN port is in DHCP Client Mode, LAN port is
in DHCP Server Mode. You can connect you PC on LAN port, then you will get an IP
Address from the IP Phone.
The IP Phone provides a built-in web server. You can use Web browser to configure
the IP Phone. First please input the IP address http://192.168.123.1:9999 in the Web
page. Please remember to add the port number :9999.

3.1 Login.

1. Please input the username and password into the blank field. The default setting is:
For Administrator, the username is: root; and the password is: test. If you use
the account login, you can configure all the setting.
For normal user, the username is: system or user; and the password is: test.
If you use the account login, but you can not configure the SIP setting.
8
IP Phone Manual
2. Click the Login button will move into the VOIP PHONE web based management
information page.
3. If you change the setting in the Web Management interface, please do remember
to click the Submit button in that page. After you finished the change of the
setting, click the Save function in the left side, and click the Save Button. When
you finished the setting, please click the Reboot function in the left side, and click
the Reboot button in that page. After the system restart, all the setting can work
properly.

3.2 System Information for the VOIP PHONE

1. When you login the web page, you can see the VOIP PHONE current system
information like firmware version, company
2. Also you can see the function lists in the left side. You can use mouse to click the
function you want to set up.
etc in this page.
9