Cole Parmer 1200 Series User Manual - Page 8

Browse online or download pdf User Manual for Measuring Instruments Cole Parmer 1200 Series. Cole Parmer 1200 Series 18 pages.

Print Page

At F mode, set the factor number and change to C mode (refer to Factor Mode in Basic

Operation section);

If you want to print the test results at C mode, push the MODE button to the position

when the LED light is off, then push the ENT button;

If connected with a PC using UNICO

communication with the PC will be set up (refer to the UNICO

Spectrophotometer Software User's Manual Version SS-1.22 for details).

Sample Compartment: Accept 10 mm test tube or 10 mm square cuvette (with

different cuvette holders). The compartment can accept up to 50 mm pathlength

cuvettes with optional holders.

WAVELENGTH (Wavelength Control) Knob: Select desired wavelength in nanometers

(nm).

Wavelength Readout Window: Display desired wavelength.

Changing Cuvette Holders

There are five different Cuvette Holders (Sample Holders) (refer to Figure-4 from left

to right):

• S-1200-101: Test Tube V-type Cuvette Holder with base for 8~25 mm Diameter

• S-1200-102: Single Square Cuvette Holder with base for 10 mm Cuvettes

• S-1200-103: 4-poaition Cuvette Holder for 10 mm Square Cuvette

• S-1200-104: Longpath 4-position Cuvette Holder for up to 50 mm rectangular

• S-1200-105: Water-jacketed Cuvette Holder with base and panel for

S-1200-101, S-1200-102, and S-1200-105 all consist of two parts: the upper holder and

the identical universal base (S-1200-106: Universal base for V-type holder, Single

Cuvette Holder and water-jacketed Holder)

position Cuvette Holder (Figure-5) with a V-type Tube Holder (Test Tube Holder).

The only tool needed is a standard Philips head screwdriver.

Figure-4

Windows-based Application Software, the

Test Tubes

Cuvettes

temperature controlled application

Sample Holders for Model 1200/1201

Follow the steps below to replace a 4-

1200 Series