DOREMIDI MPC-10 Instructions Manual - Page 4

Browse online or download pdf Instructions Manual for Media Converter DOREMIDI MPC-10. DOREMIDI MPC-10 9 pages. Midi pedal converter
Also for DOREMIDI MPC-10: Instructions Manual (8 pages)

Print Page
a. Software environment requirements: Windows 7 and above systems, MacOS.
b. Select the serial port number "COMxx" and click "Connect".
c.
Click "CHECK" to get the current pedal settings.
d. Pedal Number: The serial number of the current pedal, which is selected according to the
interface that the pedal is inserted into, and displayed after connection. If a dual-switch pedal
is connected, the serial number will increase.
e. Message Number: One pedal can set 1~16 independent MIDI messages, which will be sent out
when the pedal is pressed.
f.
Pedal Type: There are Expression pedal, Switch pedal, Hi-Hai pedal. After connecting the pedal,
click "CHECK" to get the pedal type. If the pedal is not connected, you can also directly select
the pedal type to set.
g. MIDI Channel: Set the channel of MIDI messages. There are 16 MIDI channels.
h. STATUS: Set the MIDI message type of the pedal. Different pedals have different MIDI message
types, such as:
STATUS
Pedal Type
Expression Pedal
Switch Pedal
Hi-Hat Pedal
i.
DATA1/DATA2 Range: Set the range of pedal MIDI messages. When the pedal is pressed, the
product will send MIDI messages within the range.
j.
Gain: Set the gain of MIDI messages, which can be set to OFF, 1~100. After setting, the MIDI
messages will increase in multiples of 1~100%, and the value is still within the range of
DATA1/DATA2 Range.
(Note: This parameter is generally used for the expression pedal/hi-hat pedal. After setting the gain, the
pedal can reach the maximum value without stepping down to the end)
CC
PC
NOTE
✔
✔
✔
✔
✔
✔
✔
Pitch Bend
Channel Pressure
✔
✔