DOREMIDI MIDI light box Instructions Manual - Page 4

Browse online or download pdf Instructions Manual for Controller DOREMIDI MIDI light box. DOREMIDI MIDI light box 7 pages.

Print Page
LIGHT" port of the product, and ensure that the connection is firm.
Connect application software
After connecting to the software, the light strip can light up according to the note message sent by
the software. When the instrument produces a note, it is also sent to the software. MLT-10 provides two
ways to connect the software, please select the connection method according the software.
Name
Bluetooth
MIDI
USB MIDI
(Notice:
1)
The Bluetooth MIDI of the mobile phone/iPad should be connected in the software, but not in the system
settings. The connection methods of Bluetooth MIDI in different operating systems are different, pl ease refer
to " Bluetooth MIDI Connection Tutorial .pdf".
2)
The USB port of the mobile phone/tablet computer needs to have the OTG function.
3)
Some APPs can only receive note signals and cannot send note signals, so the light strip will not light up.
4)
Some APPs will restrict the access of other products, and such APPs cannot be used.)
Connection diagram
Turn on the Bluetooth of the mobile phone/computer.
Connect "MLT-10-****" in the application software, after the connection is
successful, the display will display " ".
Check whether the MIDI output/input of the software is selected as "MLT-10-****"
(some software needs to configure MIDI input/output).
Connect the USB DEVICE port of the MTL-10 to the USB port of the
computer/mobile phone/tablet via a USB cable.
After the connection is successful, the display shows "USB: D".
Operation