Cole Parmer CN-200 Series Instruction Manual - Page 13
Browse online or download pdf Instruction Manual for Controller Cole Parmer CN-200 Series. Cole Parmer CN-200 Series 20 pages. Analogue controllers
Print Page
9. MAINTENANCE
9. MAINTENANCE
9.
9.1. General Information.
MAINTENANCE
9.1. General Information.
9.1. General Information.
maintenance tasks.
maintenance tasks.
Maintenance should only be carried out under the direction of the
9. MAINTENANCE.
Responsible Body, by a competent electrician. Failure to do so may
Maintenance should only be carried out under the direction of the
9.1. General information.
result in damage to the product and in extreme cases be a danger to the
Responsible Body, by a competent electrician. Failure to do so may result in
Maintenance should only be carried out under the direction of the
end user.
damage to the product and in extreme cases be a danger to the end user.
Responsible Body, by a competent electrician. Failure to do so may result in
With proper care in operation this equipment has been designed to give many years
undertaking any maintenance tasks.
damage to the product and in extreme cases be a danger to the end user.
of reliable service. Contamination or general misuse will reduce the effective life of
With proper care in operation this equipment has been designed to give many years
this product and may cause a hazard.
of reliable service. Contamination or general misuse will reduce the effective life of
With proper care in operation this equipment has been designed to give many years
a competent electrician. Failure to do so may result in damage to the product and in extreme
this product and may cause a hazard.
of reliable service. Contamination or general misuse will reduce the effective life of
cases be a danger to the end user.
Maintenance for the unit should include:
this product and may cause a hazard.
With proper care in operation this equipment has been designed to give many years of
• Periodic electrical safety testing (an annual test is recommended as the
Maintenance for the unit should include:
reliable service. Contamination or general misuse will reduce the effective life of this product
and may cause a hazard.
minimum requirement).
Maintenance for the unit should include:
Maintenance for the unit should include:
• Regular inspection for damage with particular attention to the mains lead and
Periodic electrical safety testing (an annual test is recommended as the
•
plug set.
minimum requirement).
Periodic electrical safety testing (an annual test is recommended as the
•
minimum requirement).
Regular inspection for damage with particular attention to the mains lead an
• Routine cleaning of the equipment should be undertaken using a clean cloth.
•
plug set.
Regular inspection for damage with particular attention to the mains lead an
•
DO NOT USE SOLVENTS FOR CLEANING ANY PART OF THIS EQUIPMENT.
plug set.
Routine cleaning of the equipment should be undertaken using a clean cloth
•
DO NOT USE SOLVENTS FOR CLEANING ANY PART OF THIS EQUIPMENT.
Routine cleaning of the equipment should be undertaken using a clean cloth
•
9.2. Replacing controller fuse.
9.2. Replacing controller fuse.
DO NOT USE SOLVENTS FOR CLEANING ANY PART OF THIS EQUIPMENT.
CN-200-2300 & CN-200-1100-115
DO NOT USE SOLVENTS FOR CLEANING ANY PART OF THIS EQUIPMENT.
MC227 & MC228X1X1
1. Unscrew the fuse holder cap from the fuse housing.
9.2. Fuse Replacement.
Unscrew the fuse holder cap from the fuse housing and
the correct rate and value (see section 11 – Spares and accessories).
9.2. Fuse Replacement.
2. Remove the fuses. Fit replacement fuses of the correct rate and value. Refer to 'Fuse
Rating' in the Technical Specification section for correct fuse type and rating.
The mains fuse holder is located at the side of this product. Refer to Technical
Specification, 'Fuse Rating' for correct fuse type and rating. Turn your product off an
The mains fuse holder is located at the side of this product. Refer to Technical
remove it from the mains supply. Open fuse draw and remove fuses. Fit replaceme
Specification, 'Fuse Rating' for correct fuse type and rating. Turn your product off an
fuses and close the draw.
remove it from the mains supply. Open fuse draw and remove fuses. Fit replaceme
fuses and close the draw.
Page 13 of 20
Unplug the unit from the mains voltage supply and allow it to cool
Unplug the unit from the mains voltage supply before undertaking any
before undertaking any maintenance tasks.
Unplug the unit from the mains voltage supply before undertaking any
Unplug the unit from the mains voltage supply and allow it to cool before
Maintenance should only be carried out under the direction of the Responsible Body, by
Periodic electrical safety testing (an annual test is recommended as the minimum
requirement).
Regular inspection for damage with particular attention to the mains lead and plug
set.
Routine cleaning of the equipment should be undertaken using a clean cloth.
remove the fuse. Fit replacement fuse of
13
M7759 Issue 3.4