Cole Parmer CN-200 Series Instruction Manual - Page 14

Browse online or download pdf Instruction Manual for Controller Cole Parmer CN-200 Series. Cole Parmer CN-200 Series 20 pages. Analogue controllers

Print Page

Cole Parmer CN-200 Series Instruction Manual

• Press

reference instrument.

9.3.

Spillage and Decontamination.

• Exit from calibration by pressing button

In the event of spillage switch off and unplug this product from the mains electrical

9.5. Spillage and Decontamination.

supply. Wipe off all excess liquid from the unit and surrounding area using an

absorbent soft cloth.

In the event of spillage switch off and unplug this product from the mains electrical

supply. Wipe off all excess liquid from the unit and surrounding area using an

absorbent soft cloth.

If in doubt please consult Customer Support. Refer to section 11.

If in doubt please consult Customer Support. Refer to section 10.

If the equipment has been exposed to contamination, the

Responsible Body is responsible for carrying out appropriatede

contamination. If hazardous material has been spilt on or inside the

If the equipment has been exposed to contamination, the

Responsible Body is responsible for carrying out appropriate

equipment, decontamination should only be undertaken under the control of

decontamination. If hazardous material has been spilt on or inside the

the Responsible Body with due recognition of possible hazards. Before using

equipment, decontamination should only be undertaken under the control of

any cleaning or decontamination method, the Responsible Body should check

the Responsible Body with due recognition of possible hazards. Before using

any cleaning or decontamination method, the Responsible Body should check

with the manufacturer the proposed method will not damage the equipment.

Prior to further use, the Responsible Body shall check the electrical safety of

the unit. Only if all safety requirements are met can the unit be used again.

the unit. Only if all safety requirements are met can the unit be used again. The

The above procedure is intended as a guide. Should spillage occur with a toxic

above procedure is intended as a guide. Should spillage occur with a toxic or

hazardous fluid then special precautions may be necessary.

or hazardous fluid then special precautions may be necessary.

Decontamination Certificate.

Note: In the event of this equipment or any part of the unit becoming damaged, or

requiring service, the item(s) should be returned to the manufacturer for repair

Note: In the event of this equipment or any part of the unit becoming damaged, or

accompanied by a decontamination certificate. Copies of the Certificate are

requiring service, the item(s) should be returned to the manufacturer for repair

available from Distributor/Manufacturer. Appendix A of this instructions book

may be copied and enlarged.

accompanied by a completed decontamination certificate. Copies of the Certificate

are available from Distributor/Manufacturer.

At the end of life, this product must be accompanied by a Decontamination

Certificate. See section 6.3 and 6.4

At the end of life, this product must be accompanied by a completed

Decontamination Certificate.

If in doubt please consult Customer support. Refer to section 10.

Page 20 of 24

o display the value and then use

to make the read value coincide with the value measured by the

M6493 Issue 10.3