Dot Origin VTAP50 Installation Manual - Page 11

Browse online or download pdf Installation Manual for Network Hardware Dot Origin VTAP50. Dot Origin VTAP50 16 pages. Oem module

Print Page
Dot Origin VTAP50 Installation Manual

3.4 Optional captive cable connection - RS232 and USB

The PCB has a special connector J1 (an 8 pin, 2mm pitch header connector) which can be
used to attach a captive cable with a matching crimp housing, for RS232 or an alternate
USB connection.
The standard connector fitted to the PCB, in most cases, is a Hirose DF11CZ-8DP-2V male
header plug with shroud. The matching crimp housing is the Hirose DF11-8DS-2C.
CAUTION: If the J1 connector on your PCB does not include a shroud, to guide the
matching wires into place, you can use a wider range of mating connectors. Do please take
extra care to ensure your connecting cable is oriented correctly to match the pins.
Figure 3-3 VTAP50 captive power cable or RS232 connection -
CAUTION: There are a small number of VTAP50 v1 Rev 1 units in circulation. Please be
aware that the pins on v1 Rev 1 hardware are pairwise switched.
Figure 3-4 VTAP50 captive power cable or RS232 connection -
VTAP50 OEM MODULE INSTALLATION GUIDE
VTAP50 v1 Rev 2 Hardware onwards
VTAP50 v1 Rev 1 Hardware only
PAGE 6