Baumer DENEX Edge Detector II User Manual - Page 4
Browse online or download pdf User Manual for Accessories Baumer DENEX Edge Detector II. Baumer DENEX Edge Detector II 20 pages.
Print Page
1
RECEIVING AND HANDLING
Upon delivery of the equipment, thoroughly inspect the shipping containers and contents
for indications of damage incurred in transit. If any concealed loss or damage is
discovered, notify the forward agent.
A complete DENEX Edge Detector II shipping box should contain:
1 DENEX Edge Detector II
1 Female Connector, Amphenol Tuchel T3476 001
1 Installation Manual
2
BASIC FUNCTION
The DENEX Edge Detector II is a non-contact sensor, which counts all kinds of printed
products on an overlapped stream. It senses the leading edge and generates one output
pulse for every product. Product thickness from a single folded sheet up to a maximum
stream thickness of 70 mm can be sensed without adjustments.
The laser diode that is used produces a visible and very intensive and focused light beam
that is projected onto the stream. The reflected light from the spot is collected by two light
sensitive detectors P and R and is analyzed by a microprocessor. The difference in
reflected light that occurs, when the light spot is temporarily hidden behind the passing
product edge provides the basic data for the sensor to determine a count output pulse.
The microprocessor controlled DENEX Edge Detector II can be adapted to different
operating modes by changing DIP-switches, which can be reached from outside, via the
lid.
User Manual DENEX Edge Detector II
Version 2013-02, V1.6
Figure 2.1 The principle of operation
4/20
www.baumer.com
Baumer Electric AG
Frauenfeld, Switzerland