Baumer DENEX Edge Detector II Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Akcesoria Baumer DENEX Edge Detector II. Baumer DENEX Edge Detector II 20 stron.

RECEIVING AND HANDLING

Upon delivery of the equipment, thoroughly inspect the shipping containers and contents

for indications of damage incurred in transit. If any concealed loss or damage is

discovered, notify the forward agent.

A complete DENEX Edge Detector II shipping box should contain:

1 DENEX Edge Detector II

1 Female Connector, Amphenol Tuchel T3476 001

1 Installation Manual

The DENEX Edge Detector II is a non-contact sensor, which counts all kinds of printed

products on an overlapped stream. It senses the leading edge and generates one output

pulse for every product. Product thickness from a single folded sheet up to a maximum

stream thickness of 70 mm can be sensed without adjustments.

The laser diode that is used produces a visible and very intensive and focused light beam

that is projected onto the stream. The reflected light from the spot is collected by two light

sensitive detectors P and R and is analyzed by a microprocessor. The difference in

reflected light that occurs, when the light spot is temporarily hidden behind the passing

product edge provides the basic data for the sensor to determine a count output pulse.

The microprocessor controlled DENEX Edge Detector II can be adapted to different

operating modes by changing DIP-switches, which can be reached from outside, via the

lid.

User Manual DENEX Edge Detector II

Version 2013-02, V1.6

Figure 2.1 The principle of operation

4/20

www.baumer.com

Baumer Electric AG

Frauenfeld, Switzerland