Baumer IO-Link RR30 Instruction Manual - Page 11

Browse online or download pdf Instruction Manual for Accessories Baumer IO-Link RR30. Baumer IO-Link RR30 40 pages. Radar sensor

Print Page

MDC Source

4.2.3

Selects which measuring value is mapped to the MDC channel and is then available via the process data-IN

path. When SSC1, SSC2 or SSC4 is selected the number of switches detected by the channel is shown.

Parameter name

MDC Selection.Source

MDC Unit Code

4.2.4

Parameter name

MDC Descriptor.Unit

code

MDC Setpoint limit

4.2.5

This parameter allows to read out the limits of the measuring range of the sensor.

Parameter name

MDC Descriptor.Lower

limit

MDC Descriptor.Upper

limit

en_BA_RR30_IO-Link_V0.23.docx

13.01.2021/

Short Description

Select the process value that is

shown on the MDC channel

Short Description

Indicates the unit of the selected

MDC source

Short Description

Lower value of measuring range, if

value is below out of range is

shown

Upper value of measuring range, if

value is above out of range is

shown

Rights

11/40

Unit / Allowed values

- Distance (Default)

- Velocity

- Amplitude

- Switch Counter SSC1

- Switch Counter SSC2

- Switch Counter SSC4

Unit / Allowed values

- Distance

- Velocity

mm/s

- Amplitude

- SSC1, SSC2, SSC4 none

Unit / Allowed values

A0: 200 mm; 300 mm; 500 mm;

depends on version of sensor

A0: 6000 mm; 12000 mm;

60000 mm; depends on version

of sensor

Baumer Electric AG

Frauenfeld, Switzerland