Baumer IO-Link RR30 Instruction Manual - Page 15

Browse online or download pdf Instruction Manual for Accessories Baumer IO-Link RR30. Baumer IO-Link RR30 40 pages. Radar sensor

Print Page

4.3.5.3 Center Aligned

A compromise between left and right aligned. The hysteresis is aligned symmetrical around the individual set

points.

Figure 16 Center Aligned, Single Point Mode

Hysteresis Width

4.3.6

The hysteresis is configured in percent of the switch point distance. It is the difference between switch point

and reset point. This parameter can be beneficial to smoothen out signals when samples have quickly

changing positions.

Figure 18 Hysteresis is the difference between switch point and reset point

Bright blue: object moving from far to close distance (in this case switch point)

Dark blue: moving from close to far distance (in this case reset point)

Parameter name

Hysteresis.SSC1 Width

4.3.7

This changes the timing of the switching signals, for example to avoid bouncing/suppress false switching

operation. The ability to directly parametrize and configure the timing on the sensor itself, removes the need

to have additional coding on the PLC or to use pulse stretching adapters.

The described time filters can be configured and applied to each SSC individually.

en_BA_RR30_IO-Link_V0.23.docx

13.01.2021/

Short Description

Adjust hysteresis width as percent

of the switch point distance

15/40

Figure 17 Center Aligned, Window Mode

Rights

Unit / Allowed values

Limits 0 ... 99 %, Default 5%

Baumer Electric AG

Frauenfeld, Switzerland