COM-power corporation T-Series Instruction Manual - Page 9
Browse online or download pdf Instruction Manual for Test Equipment COM-power corporation T-Series. COM-power corporation T-Series 12 pages. Shielded coupling/decoupling networks
Print Page6.1.1 CDN Selection
The IEC‐61000‐4‐6 requires that an appropriate coupling decoupling networks (CDN) with
defined common mode impedance be used for coupling and/or decoupling purposes on any
type of power or I/O interface for which a CDN is suitable and available. The shielded T series
CDNs are only appropriate for signal lines (ethernet). Other types CDNs available from Com‐
Power Corporation are given below.
Model
CDN‐M125E
CDN‐M225E
CDN‐M325E
CDN‐M425E
CDN‐M525E
CDN‐C50E
CDN‐C75E
CDN‐S1
CDN‐S2
CDN‐S4
CDN‐S9
CDN‐S15
CDN‐S25
CDN‐AF2E
CDN‐AF4E
CDN‐AF8E
CDN‐T2E
CDN‐T4E
CDN‐T8E
19121 El Toro Rd ● Silverado, California 92676 ● (949) 459‐9600● com‐power.com
Shielded T‐series Coupling/Decoupling Networks (CDN)
Specifications
Single line, 25 Amp, 150 kHz ‐ 230 MHz
Single line + Neutral, 25 Amp, 150 kHz ‐ 230 MHz
Single line + Neutral + Earth, 25 Amp, 150 kHz ‐ 230 MHz
Three phase + Neutral, 25 Amp, 150 kHz ‐ 230 MHz
Three phase + Neutral+ Earth, 25 Amp, 150 kHz ‐ 230 MHz
50 Ohm coax cable, 150 kHz ‐ 230 MHz
75 Ohm coax cable, 150 kHz ‐ 230 MHz
Shielded cable with 1 conductor,150 kHz ‐ 80 MHz
Shielded cable with 2 conductors,150 kHz ‐ 80 MHz
Shielded cable with 4 conductors,150 kHz ‐ 80 MHz
Shielded cable with 9 conductors,150 kHz ‐ 80 MHz
Shielded cable with 15 conductors,150 kHz ‐ 80 MHz
Shielded cable with 25 conductors,150 kHz ‐ 80 MHz
Unshielded cable with 2 conductors,150 kHz ‐ 230 MHz
Unshielded cable with 4 conductors,150 kHz ‐ 230 MHz
Unshielded cable with 8 conductors,150 kHz ‐ 230 MHz
Unshielded cable with 2 conductors balanced pairs,150 kHz ‐ 230 MHz
Unshielded cable with 4 conductors balanced pairs,150 kHz ‐ 230 MHz
Unshielded cable with 8 conductors balance pairs,150 kHz ‐230 MHz
Page 9 of 12
INSTRUCTION MANUAL
REV021215