Baumer Hubner HMC16 Series Mounting And Operating Instructions - Page 30
Browse online or download pdf Mounting And Operating Instructions for Media Converter Baumer Hubner HMC16 Series. Baumer Hubner HMC16 Series 44 pages. Encoder without bearings - incremental
Print Page
SETTINGS HMCP16 / ADjUSTMENT OF THE INTERPOLATION OF THE PULSES (CyCLES)
7.3
Adjustment of the interpolation of the pulses (cycles)
Adjustment of the interpolation of the pulses (cycles) of output 1 (pin header 1) and output
2 (pin header 2)�
The output pulses (cycles) can be adjusted via 3 different jumper positions on the corre-
sponding pin header on the electronic board, see
or lower interpolation, depending on ordered output pulses (cycles) for each output, see
also
section
Jumper position output pulses (cycles), marked shows example of
0
128
512
2048
8192
32768
= Factory setting
26/40
6.2.3�
y
1
2
256
512
1024
2048
4096
8192
16384
32768
65536
131072
section 7.2.1
3
1024
0
4096
1
16384
2
65536
3
4
262144
MB168T1EN - 11184527, 19A2, Baumer_HMC16-T1_II_EN
or
7.2.2, to higher
section
section
6.2.3�