Baumer PMG10P Mounting And Operating Instructions - Page 17

Browse online or download pdf Mounting And Operating Instructions for Media Converter Baumer PMG10P. Baumer PMG10P 32 pages. Absolute encoder
Also for Baumer PMG10P: Mounting And Operating Instructions (32 pages), Mounting And Operating Instructions (36 pages), Operating Manual (44 pages), Operating Manual (44 pages), Operating Manual (40 pages), Operating Manual (40 pages), Operating Manual (40 pages), Operating Manual (36 pages)

Print Page

5.3

Trigger level

Trigger level:

High / Low:

Transmission length:

Output frequency:

5.4

Programming interface (only PMG10P)

Via connection SA and SB, encoder parameters such as the number of pulses for the in-

cremental outputs 1 and 2 and/or the switch-off and switch-on speeds can be changed and

read out� With the Z-PA�SDL�1 WLAN adapter, available as accessory, see

encoder can be accessed via a web browser�

5.5

LED function displays

LED

INC1 (incremental

output 1)

INC2 (incremental

output 2)

Status

Speed

MB261EN - 11196414, 21A1, Baumer_PMG10-Inc_EN_202103_MI_11196414

TTL/HTL (Vin = Vout)

≥2.5 V / ≤0.5 V (TTL)

≥Ub -3 V / ≤1.5 V (HTL)

≤550 m at 100 kHz (TTL)

≤350 m at 100 kHz (HTL)

≤600 kHz (TTL)

≤350 kHz (HTL)

red

Undervoltage, overload,

over-temperature

Undervoltage, overload,

over-temperature

Internal error

Speed higher

switching speed (overspeed)

ELECTRICAL CONNECTION / TRIGGER LEVEL

green

Speed lower

switching speed

section

6.1, the

17/32