Douglas Dynamics SnowEx Brine Pro 2000 Manual - Page 4

Browse online or download pdf Manual for Water Pump Douglas Dynamics SnowEx Brine Pro 2000. Douglas Dynamics SnowEx Brine Pro 2000 10 pages. Gas engine transfer pump, brine maker

Print Page

TPS-200

INSTALLATION INSTRUCTIONS

CAUTION

Read this document before installing the Gas

Engine Transfer Pump.

CAUTION

Use standard methods and practices when

installing equipment, including proper

personal protective safety equipment.

Disassembly Instructions

1. Remove the 10 body screws, lock washers, and

nuts from the pump assembly. Remove the body

from the pump assembly. Save all for later use.

Remove the

body screws,

lock washers,

and nuts.

Pump

Body

Lit. No. 11814, Rev. 00

2. Remove the check valve from the volute. Remove

the one upper and two lower volute screws, and

remove the volute. Save all for later use.

Check

Valve

Lower

Volute

Screws

3. Remove the impeller bolt from the impeller and

discard. Remove the impeller and keyshaft

carefully, using a pry bar if necessary. Save for

later use.

Remove

body screws,

lock washers,

and nuts.

Impeller

Bolt

Upper

Volute

Screw

Impeller

Volute

October 1, 2017