Baumer Hubner HENQ 1100 Operating Instructions Manual - Page 5

Browse online or download pdf Operating Instructions Manual for Measuring Instruments Baumer Hubner HENQ 1100. Baumer Hubner HENQ 1100 36 pages. Encoder analyzer

Print Page

INTRODUCTION

The Baumer Hübner ENcoder Quality Measurement System HENQ 1100 is a hand-held

instrument for the testing of incremental encoders that produce HTL/TTL or SinCos signals�

Fast signal processing also facilitates the detection of sporadic errors, such as those caused

by interference in the signal leads or short voltage drop-outs in the power supply� The angu-

lar position and speed are in addition displayed continuously�

As well as Baumer Hübner incremental encoders, encoders from other manufacturers that

put out TTL/HTL or sin/cos signals can also be connected�

Power is fed to the encoder either via the HENQ 1100 or externally� So the encoder can be

run separately, disconnected from its normal supply, or one can tap into a system that is

running�

The operation of the instrument is carried out through the built-in user friendly keypad and a

4-line LCD with background lighting�

The memory makes it possible to collect measurements from several encoders and evaluate

them�

It is possible to connect a laptop or PC via the integrated RS-485 interface (optional RS-232

or USB-RS-485-converter)�

Then a Windows measurement application enables a continuous display and recording of

current data, including any errors in the encoder or its wiring� Statistical evaluation is also

possible�

User-defined profiles can be used to program various thresholds as parameters, for instan-

ce: permissible phase shift, permissible pulse/pause ratio�

Errors are signaled not only visually, through the LCD, but also acoustically, by a built-in

buzzer�

MB112EN - 11185046, 19A1, Baumer_HENQ1100_OI_EN

2/32