Baumer Hubner HENQ 1100 Інструкція з експлуатації Посібник з експлуатації - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Вимірювальні прилади Baumer Hubner HENQ 1100. Baumer Hubner HENQ 1100 36 сторінок. Encoder analyzer

Друкувати сторінку

INTRODUCTION

The Baumer Hübner ENcoder Quality Measurement System HENQ 1100 is a hand-held

instrument for the testing of incremental encoders that produce HTL/TTL or SinCos signals�

Fast signal processing also facilitates the detection of sporadic errors, such as those caused

by interference in the signal leads or short voltage drop-outs in the power supply� The angu-

lar position and speed are in addition displayed continuously�

As well as Baumer Hübner incremental encoders, encoders from other manufacturers that

put out TTL/HTL or sin/cos signals can also be connected�

Power is fed to the encoder either via the HENQ 1100 or externally� So the encoder can be

run separately, disconnected from its normal supply, or one can tap into a system that is

running�

The operation of the instrument is carried out through the built-in user friendly keypad and a

4-line LCD with background lighting�

The memory makes it possible to collect measurements from several encoders and evaluate

them�

It is possible to connect a laptop or PC via the integrated RS-485 interface (optional RS-232

or USB-RS-485-converter)�

Then a Windows measurement application enables a continuous display and recording of

current data, including any errors in the encoder or its wiring� Statistical evaluation is also

possible�

User-defined profiles can be used to program various thresholds as parameters, for instan-

ce: permissible phase shift, permissible pulse/pause ratio�

Errors are signaled not only visually, through the LCD, but also acoustically, by a built-in

buzzer�

MB112EN - 11185046, 19A1, Baumer_HENQ1100_OI_EN

2/32