Baumer SXC20 User Manual - Page 37

Browse online or download pdf User Manual for Digital Camera Baumer SXC20. Baumer SXC20 48 pages. Sxc series cameralink cameras with truesense imaging sensors
Also for Baumer SXC20: Quick Start Manual (2 pages)

Print Page

User Sets

8.6.

Three user sets (1-3) are available for the Baumer cameras of the SXC series. The user

sets can contain the following information:

Parameter

Binning Mode

CameraLink

Control

Defectpixellist

Digital I/O Settings

Exposure Time

Gain Factor

Look-Up-Table

These user sets are stored within the camera and and cannot be saved outside the de-

vice.

By employing a so-called "user set default selector", one of the three possible user sets

can be selected as default, which means, the camera starts up with these adjusted pa-

rameters.

8.7.

Factory Settings

The factory settings are stored in an additional parametrization set which is used by de-

fault. This settings are not editable.

Parameter

Mirroring Control

Offset

Partial Scan

Pixelformat

Readout Mode

Testpattern

Trigger Settings