Baumer SXC20 Manual do utilizador - Página 37

Procurar online ou descarregar pdf Manual do utilizador para Câmara digital Baumer SXC20. Baumer SXC20 48 páginas. Sxc series cameralink cameras with truesense imaging sensors
Também para Baumer SXC20: Manual de início rápido (2 páginas)

Imprimir página

User Sets

8.6.

Three user sets (1-3) are available for the Baumer cameras of the SXC series. The user

sets can contain the following information:

Parameter

Binning Mode

CameraLink

Control

Defectpixellist

Digital I/O Settings

Exposure Time

Gain Factor

Look-Up-Table

These user sets are stored within the camera and and cannot be saved outside the de-

vice.

By employing a so-called "user set default selector", one of the three possible user sets

can be selected as default, which means, the camera starts up with these adjusted pa-

rameters.

8.7.

Factory Settings

The factory settings are stored in an additional parametrization set which is used by de-

fault. This settings are not editable.

Parameter

Mirroring Control

Offset

Partial Scan

Pixelformat

Readout Mode

Testpattern

Trigger Settings