Baumer HUBNER BERLIN HOG 10 Installation And Operating Instructions Manual - Page 5

Browse online or download pdf Installation And Operating Instructions Manual for Industrial Equipment Baumer HUBNER BERLIN HOG 10. Baumer HUBNER BERLIN HOG 10 40 pages. Incremental encoder with connecting cable ölfle
Also for Baumer HUBNER BERLIN HOG 10: Installation And Operating Instructions Manual (36 pages), Installation And Operating Instructions Manual (40 pages), Mounting And Operating Instructions (40 pages), Mounting And Operating Instructions (40 pages), Mounting And Operating Instructions (40 pages), Mounting And Operating Instructions (32 pages), Mounting And Operating Instructions (36 pages), Mounting And Operating Instructions (36 pages), Mounting And Operating Instructions (28 pages)

Print Page
Baumer HUBNER BERLIN HOG 10 Installation And Operating Instructions Manual
1

General notes

1.1
Symbol guide:
Danger
Warnings of possible danger
General information for attention
Informations to ensure correct product operation
i
Information
Recommendation for product handling
1.2
The encoders HMG 11 and HOG 10 are opto electro nic precision measurement devices
which must be handled with care by skilled personnel only.
1.3
The expected operating life of the combination depends on the ball bearings, which are
equipped with a permanent lubrication.
1.4
The storage temperature range of the combination is between -15 °C and +70 °C.
1.5
The operating temperature range of the combination is between -20 °C and
+85 °C, restricted in potentially explosive environments, see section 2,
measured at the housing.
1.6
EU Declaration of Conformity meeting to the European Directives.
1.7
The encoders are UL approved (not applicable for operation in potentially explosive atmos-
pheres).
1.8
We grant a 2-year warranty in accordance with the regulations of the ZVEI (Central Association
of the German Electrical Industry).
1.9
Maintenance work is not necessary. Repair work must be carried out by the manufacturer.
Alterations of the devices are not permitted.
1.10
In the event of queries or subsequent deliveries, the data on the device type label must be
quoted, especially the type designation and the serial number.
1.11
Combination components are to be disposed of according to the regulations prevailing in the
respective country.
i
Warning!
Damaging the seal
MB097.3 - 11070460
on the device invalidates warranty.
Baumer_HMG11-HOG10_II_DE-EN (16A2)
1
General notes
2