Baumer HUBNER BERLIN HOG 10 Kurulum ve Kullanım Talimatları Kılavuzu - Sayfa 5

Endüstriyel Ekipmanlar Baumer HUBNER BERLIN HOG 10 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları Kılavuzu indirin. Baumer HUBNER BERLIN HOG 10 40 sayfaları. Incremental encoder with connecting cable ölfle
Ayrıca Baumer HUBNER BERLIN HOG 10 için: Kurulum ve Kullanım Talimatları Kılavuzu (36 sayfalar), Kurulum ve Kullanım Talimatları Kılavuzu (40 sayfalar), Montaj ve Kullanım Talimatları (40 sayfalar), Montaj ve Kullanım Talimatları (40 sayfalar), Montaj ve Kullanım Talimatları (40 sayfalar), Montaj ve Kullanım Talimatları (32 sayfalar), Montaj ve Kullanım Talimatları (36 sayfalar), Montaj ve Kullanım Talimatları (36 sayfalar), Montaj ve Kullanım Talimatları (28 sayfalar)

Baumer HUBNER BERLIN HOG 10 Kurulum ve Kullanım Talimatları Kılavuzu
1

General notes

1.1
Symbol guide:
Danger
Warnings of possible danger
General information for attention
Informations to ensure correct product operation
i
Information
Recommendation for product handling
1.2
The encoders HMG 11 and HOG 10 are opto electro nic precision measurement devices
which must be handled with care by skilled personnel only.
1.3
The expected operating life of the combination depends on the ball bearings, which are
equipped with a permanent lubrication.
1.4
The storage temperature range of the combination is between -15 °C and +70 °C.
1.5
The operating temperature range of the combination is between -20 °C and
+85 °C, restricted in potentially explosive environments, see section 2,
measured at the housing.
1.6
EU Declaration of Conformity meeting to the European Directives.
1.7
The encoders are UL approved (not applicable for operation in potentially explosive atmos-
pheres).
1.8
We grant a 2-year warranty in accordance with the regulations of the ZVEI (Central Association
of the German Electrical Industry).
1.9
Maintenance work is not necessary. Repair work must be carried out by the manufacturer.
Alterations of the devices are not permitted.
1.10
In the event of queries or subsequent deliveries, the data on the device type label must be
quoted, especially the type designation and the serial number.
1.11
Combination components are to be disposed of according to the regulations prevailing in the
respective country.
i
Warning!
Damaging the seal
MB097.3 - 11070460
on the device invalidates warranty.
Baumer_HMG11-HOG10_II_DE-EN (16A2)
1
General notes
2