Follett 25HI425A Installation Manual - Page 3

Browse online or download pdf Installation Manual for Ice Maker Follett 25HI425A. Follett 25HI425A 17 pages. Ice and water dispensers

Print Page

Electrical

§ 115 V, 60 Hz, 1 phase, 11.0A

§ Connect to a 15A dedicated circuit.

§ Furnished with 7 ft (2 m) power cord with a 90° NEMA hospital grade 5-15 plug.

Ambient

Air temp*

Water temp

†

Water pressure (psi/bar)

* Ambient air temperature is measured at the air-cooled condenser coil inlet.

Ambient water temperature is measured in the ice machine float reservoir.

†

Plumbing

Dispenser drain

Water inlet

Condenser inlet

Condenser outlet

Note: Water shut-off recommended within 10 ft. (3m) of dispenser. Drain to be hard-piped and insulated. Maintain at

least 1/4" per foot (20 mm per 1 m) run of slope.

Ventilation clearances

Required for ventilation

Suggested for service

Note: Do not block right side air intake or right side air exhaust.

Dry weight

§ 25/50CI425A/W (countertop): 215 lbs. (98 kg)

§ 25/50HI425A/W (wall mount): 230 lbs. (105 kg)

100 F/38 C Max.

50 F/10 C Min. (Best performance below 80 F (27 C)

90 F/32 C Max.

45 F/7 C Min. (Best performance below 70 F (21 C)

70/5 Max.

10/0.7 Min.

Connections 25/50CI425A

Water-cooled 3/8" FPT

3" (77 mm) each side

12" (30.5 cm) top,

6" (15.3 cm ) left side

25CI425A/W, 25HI425A, 50CI425A/W, 50HI425A

Rough-ins 25/50HI425A

3/4" MPT

3/8" FPT

Air-cooled

Air-cooled 3/4" FPT

3/8" FPT

N/A

Water-cooled

N/A

12" (30.5 cm) top