Follett CI100A Installation Manual - Page 12

Browse online or download pdf Installation Manual for Water Dispenser Follett CI100A. Follett CI100A 20 pages. Ice and water dispenser

Print Page

4. Install the angle bracket inside the cabinet,18.15" (46.1 cm) from the

toe kick (Fig. 2.1). The bracket prevents the dispenser from being

located/pushed beyond the recommended cabinet space depth. Do

not attach the bracket to the dispenser.

Potable Water Connection

1. Connect water line. Recommended routing (Fig. 9) allows easy

access to water for cleaning and sanitizing procedure.

2. If installing the optional internal water filter*, please see Optional

Internal Water Filter Installation before proceeding.

* If your dispenser has the internal water filter option, the water filter must be

installed for the dispenser to operate. Because internal components will need to

be accessed for both procedures, Follett recommends installing the water filter

just prior to initial sanitizing.

3. Connect power supply.

4. Sanitize the dispenser prior to use (see the Initial Sanitizing Kit

instructions shipped with this unit).

Optional Internal Water Filter Installation

If your dispenser has the internal water filter option, the water filter must be

installed for the dispenser to operate. Because internal components will need

to be accessed for both procedures, Follett recommends installing the water

filter just prior to initial sanitizing.

1. If installing the optional internal water filter, please complete

the steps shown in Accessing Internal Components before

proceeding.

2. Lift and remove the top panel, set aside (Fig. 10.1).

3. Remove two screws (Fig. 10.2) and remove left side panel.

4. Install filter as shown. Turn filter clockwise until it is fully seated

(Fig. 10.3).

Dispenser and Ice Machine - 115 V, 230 V, 220 V

Fig. 8

18.15" (46.1 cm)

Fig. 9

3' (91.4 cm)

Plug

Valve

Water Inlet

Fig. 10