DP VIDEO D200P User Manual - Page 4

Browse online or download pdf User Manual for Car Receiver DP VIDEO D200P. DP VIDEO D200P 11 pages.

Print Page
Problem
to return to the normal playback speed mode.
When the unit is in System Setting Menu / Program
Menu , press System Setting / PRG Play to exit the
System Menu /Program Menu. Or you can press Play
to return to the normal playback mode.
If the unit is in the mute mode, please press Mute again
to enable the normal sound play.
Turn on the unit's digital output if it is off.
If the sound track 2 of the SVCD is not recorded, no
sound will be output when the track 2 is selected. Open
up the Console Menu, and select track 1 for playback in
the audio selection.
The disc is dusty and needs to be cleaned.
Noise
The
noise
comes
DIGITAL OUT OPTICAL or COAXIAL interface if the
played CD is DTS standard.
No stereo sound
effect when
Check if the digital output is turned on.
playing video CD
Press Stereo to select stereo sound.
or CD
Operations
Remove the obstacle between the DVD player and the
remote control.
The remote control is positioned too far from the DVD
The remote
video player. Operate the remote control within
control does not
operating distance.
work properly.
Point the remote control at the remote sensor of the
DVD video player.
If the batteries in the remote control are exhausted,
please replace batteries with new ones.
No disc is inserted. (No disc symbol appears on the
screen). Please insert the intended disc.
Disc playback
The disc is placed upside down. Place the disc with the
failure
playback side down.
The disc is dusty. Please clean the disc.
There could be humidity in the unit. Please turn on the
power and stay for 30 minutes without running the disc.
Action
from other interfaces except for
the
17
(10) REPEAT
Repeat the selected chapter or title.
(11) Setup
Please refer to the chapter about machine setup.
(12) Subtitle
Switch DVD subtitle channel.
(13) P/N
Switch to PAL, NTSC, or AUTO system.
(14) L/R
Switch VCD audio channel.
(15) NUMBER BUTTONS:
[0], [1]... [9] number buttons are used to enter number, e.g.
number of track, DVD chapter number, time data, etc.
16
MODE
17
18
19
ENTER
20
MENU
21
22
23
SLOW
REPEAT
STEP
ZOOM
24
SETUP
VOL +
25
SUBTITLE
LANGUAGE
26
P/N
L/R
OSD
VOL -
27
28
1
2
3
4
5
6
7
8
9
0
10+
29
30
(16) Eject
Press this button, and the disc will
be unloaded from the player. Press
it again, and the disc will be
loaded.
(17)
While playing, press this button
once to pause playing, and then
press
to resume playing. But
if you press it twice, the playing will
be stopped completely.
(18)
While playing, push this button to
skip to next chapter or track.
2
.