DP VIDEO D200P User Manual - Page 5
Browse online or download pdf User Manual for Car Receiver DP VIDEO D200P. DP VIDEO D200P 11 pages.
Print Page(19)
Play or Pause current playing.
(20)
Right Direction Buttons: When the screen display the menu of DVD
Disc or System Menu
, the player is in waiting state; you can push
these buttons to move cursor, then select the desired item.
(21) MENU
While playing DVD, push this button to display the option menu
included in the disc.
(22)
Search forward on the disc.
(23) ZOOM
Press this key to zoom the pictures by several multiples.
(24) STEP
Single-step play.
(25) VOL+
Volume Up.
(26)
LANGUAGE
Multiple languages selectable.
(27)
VOL-
Volume Down.
(28)
OSD
Display the machine status, such as playing time, track
information, etc.
(29)
MUTE
Switch On/Off the audio output.
(30)
10+
When you need choose songs with number over 10, press one
3
Problem
POWER
The power supply
Please check if the AC power cord has been connected
is disconnected.
correctly.
PICTURE
Replace the breakage video cable before you turn on the
player.
Re-check that the player has been properly connected to
TV set.
Connect the video cable securely into the appropriate
No picture
jacks and ensure that the equipment is connected firmly.
Ensure that the TV set is turned on.
Make sure that the appropriate video input mode is
selected on the TV, so that the video image can be
displayed on the screen properly.
The disc is dusty and needs to be cleaned.
It is normal for some distortion to occur when the
Progressive Scan Mode of DISPLAY Setup is selected,
Picture distortion
even if the TV set is compatible with the progressive scan
mode (525p). Therefore, please change the Scan Mode to
Interlaced Scan.
Picture doesn't
The images may not fill up the whole TV screen even after
the Picture Mode of the Audio Menu is set. This is because
fit TV screen
the DVD images are fixed in width.
SOUND
Check for the proper connections of the unit with the TV
set and amplifier.
When the amplifier is connected, check if the amplifier
power has been turned on and if the cable has been
inserted into the appropriate jack.
No sound
Replace the audio cable with a new one if the cable is
damaged.
If the unit has been played in Slow or Pause mode, press
Play to return to the normal playback mode.
If the unit is played in X8, X16, X 32 modes, press Play
Action
16